 |
 |
|
|
电话： 400 8955 806
021-69600223
13501899223
微信同号
邮箱：2064857910@qq.com
|
|
|
|
|
|
| |
|
| 产品名称:t2防静电台垫( 欧标) |
| 产品型号:A827 |
| 产品材料:丁晴橡胶 |
| 使用场合:防静电区域 |
| 质保承诺:全面质保1年 |
| 品牌:威尔韦
制造商:上海瑞崇橡塑有限公司 |
|
|
| 详细描述 |
Dissipative Dual Layer Rubber Material Provides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface.
Dissipative (10E6 - 10E8 ohms Rtt) Top Layer - Limited Lifetime Warranty Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items. Electricals will not drift for the life of the mat.
Conductive (<10^4 Rtt) Bottom Layer - Limited Lifetime Warranty The dedicated conductive layer reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the mats to be used with ESD workstation monitors. Electricals will not drift for the life of the mat.
High Strength Nitrile Rubber Compound Designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals. Click Here for Chemical Resistance Chart
Ultra-Violent (UV) Stabilizer Additives Stabilizes color retention, insures ESD performance over time and eliminates surface layer deterioration resulting in cracking when the product is flexed.
Non-Humidity Dependence Provides consistent electrical performance regardless of ambient humidity
Lot Traceability Information Provides tracking information for lifespan of the product and to ensure quality control.
Lead-free RoHS compliant"The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).
|
|
| |
| |
|
首页 
铁板纹系列防疲劳地垫
